1. Go to Settings.
2. Tap on System.
3. Tap on Reset Options.
4. Tap on Erase All Data (Factory Reset).
5. Tap on Reset Phone.
6. Confirm the reset by tapping Erase Everything.
7. Your Motorola G72 will now reset and reboot to its factory settings.
Table of Contents
how do restart your moto G72
To restart your Moto G72, press and hold the Power button until you see the Power menu. Select Restart or Reboot and then tap OK on the dialogue box that appears. Your device will then restart. If you’re unable to restart your device using the Power button, you can also remove the battery and then insert it again.
This method of restarting your device is only available on devices with removable batteries. If the above methods don’t work, you can also try a forced restart by pressing and holding the Power and Volume Down buttons for 10 seconds.
how to factory reset moto G72 via the menu
1. Go to Settings > System > Advanced > Reset Options
2. Tap on “Erase All Data (Factory Reset)”
3. Enter your lock screen PIN, pattern, or password
4. Tap on “Erase Everything”
5. Your phone will reset and restart.
factory reset moto G72 with a combination of buttons
To perform a factory reset on a Moto G7, you need to press and hold the Volume Down and Power buttons simultaneously for 10-15 seconds. The phone will then enter Recovery Mode, where you can navigate using the Volume buttons and select the option “Factory Reset” using the Power button. To confirm, select “Yes”.
The phone will then restart, completing the factory reset process. Note: This will erase all data from the device, so make sure to back up any important data before performing a factory reset.
what to do if resetting Motorola G72 doesn’t work
If resetting your Motorola G72 doesn’t work, you may want to try taking the device to a professional repair centre. They may be able to diagnose the issue and provide a more effective solution. Alternatively, you could try to perform a hard reset, which involves using a combination of buttons to reset the device. If all else fails, you may need to consider replacing the device.
Shah Wajahat is a Computer Science grad and a Cisco CCNA certified Professional with 3+ years of experience in the Tech & software industry. Shah loves helping people with tech by explaining to layman audience technical queries in an easier way.
