1. Go to Settings > System > Reset Options.
2. Tap Reset Phone.
3. Tap Erase All Data (Factory Reset).
4. Tap Reset Phone.
5. Enter your PIN, pattern, or password when prompted.
6. Tap Erase Everything.
7. Your Motorola G100 will now be reset to its original factory settings.
Table of Contents
how to restart your moto G100
1. Turn your Moto G100 off.
2. Press and hold the Power button and Volume Down button at the same time for about 10 seconds, until the phone vibrates.
3. Release both buttons.
4. You should see the Android System Recovery screen.
5. Using the Volume Down button, scroll to the “wipe data/factory reset” option and press the Power button to confirm the selection.
6. Scroll down to “Yes – erase all user data” and press the Power button to confirm.
7. After the reset is complete, scroll down to “Reboot system now” and press the Power button to restart your Moto G100.
how to do a factory reset moto G100 with the menu
1. Open the Settings menu on your Moto G100.
2. Scroll down to the bottom and select System.
3. Select Reset Options.
4. Select Factory Data Reset.
5. Read the information and select Reset Phone.
6. Select Erase Everything. Your Moto G100 will now reset and restart.
hard reset moto G100 with a combination of buttons
To perform a hard reset on your Moto G100, press and hold the Volume Down and Power buttons for 10 seconds. The device will then boot into recovery mode. Once in recovery mode, use the Volume Down and Volume Up buttons to navigate to the Wipe Data/Factory Reset option, and then press the Power button to select it.
Finally, select Yes when prompted to confirm the reset. Once the reset is complete, the device will reboot and you will be asked to set it up as a new device.
what to do if resetting Motorola G100 doesn’t work
If resetting your Motorola G100 doesn’t work, you may need to perform a factory reset. This can be done by going to the Settings menu and selecting the Backup & Reset option. Then, select the Factory Data Reset option. This will erase all data from the device and reset it to its original factory settings.
You may also need to perform a hard reset, which requires you to use a combination of keys to reset the device. If none of these steps works, you may need to take the device to an authorized Motorola service centre for further assistance.
Shah Wajahat is a Computer Science grad and a Cisco CCNA certified Professional with 3+ years of experience in the Tech & software industry. Shah loves helping people with tech by explaining to layman audience technical queries in an easier way.