To reset the Motorola E32 to its factory default, press and hold down the Power/End key for at least 8 seconds. Then release the Power/End key and the device will restart. The reset is complete when the Motorola logo appears on the screen.
If you are unable to reset the device this way, you can perform a soft reset by pressing and holding down the Power/End key for at least 8 seconds until the device turns off. Then press and hold the Power/End key again until the Motorola logo appears on the screen. This will also reset the device back to its factory default settings. If the soft reset does not work, you can also perform a hard reset by pressing and holding down the Power/End key and the Volume Up key for at least 8 seconds until the device turns off.
Then press and hold the Power/End key again until the Motorola logo appears on the screen. This will also reset the device back to its factory default settings.
Table of Contents
how to restart your moto E32
To restart your Motorola Moto E32, press and hold the power button until the power menu appears. Select “Restart” from the menu and then confirm your selection. Your device will then restart and be ready to use.
If your device is unresponsive or frozen, you may need to perform a hard reset. To do this, press and hold the power button and both the volume up and down buttons at the same time for 10 seconds or until the device restarts.
how to do a factory reset moto E32 with menu
1. Make sure your phone is powered off.
2. Press and hold the Volume Down and Power buttons simultaneously until you see the boot screen.
3. When the boot screen appears, use the Volume buttons to select “Recovery mode” and press the Power button to confirm.
4. You will see a screen with an Android logo and a message saying “No command”.
5. Hold down the Power button and press the Volume Up button once.
6. Use the Volume buttons to scroll down the menu to the “wipe data/factory reset” option.
7. Press the Power button to confirm the selection.
8. Use the Volume buttons to scroll down to “Yes – erase all user data” and press the Power button to confirm.
9. Your phone will then begin the factory reset process.
10. When it is finished, select “Reboot system now” and press the Power button to restart your phone.
hard reset moto E32 with a combination of buttons
To perform a hard reset on the Moto E32, press and hold the Volume Down and Power buttons for about 10 seconds. The phone will then restart. If this fails, you may need to enter recovery mode and perform a factory reset from there. To do this, press and hold the Volume Down and Power buttons until the bootloader menu appears. Then use the Volume buttons to select Recovery Mode, and press the Power button to confirm.
You should then see a menu with the option to “Wipe data/factory reset”. Select this option using the Volume buttons and press the Power button to confirm.
Shah Wajahat is a Computer Science grad and a Cisco CCNA certified Professional with 3+ years of experience in the Tech & software industry. Shah loves helping people with tech by explaining to layman audience technical queries in an easier way.
