To reset a Motorola E22, press and hold the power button for five seconds until the device turns off, then press and hold the power button again until the Motorola logo appears. When the logo appears, release the power button and the device should boot up.
If you have forgotten your password, you will need to perform a hard reset by powering off the device and then pressing and holding the Volume Up and Volume Down buttons simultaneously for 10 seconds.
If you need further help, refer to the Motorola E22 user manual.
Table of Contents
how to restart your moto E22
1. Open your Moto E22.
2. Press and hold the Power button until the phone vibrates and the Motorola logo appears.
3. When the Motorola logo appears, press and hold the Volume Down button for about five seconds.
4. You should see the Android System Recovery menu.
5. Use the Volume Down button to navigate to the option that says “Reboot system now” and use the Power button to select it.
6. Your Moto E22 should now restart.
If you’re unable to access the Android System Recovery menu, you can also restart your Moto E22 by pressing and holding the Power button until it turns off and then pressing the Power button again to turn it back on.
How to do a factory reset moto E22 with menu
1. Turn off your phone.
2. Press and hold the volume down and power buttons at the same time until the bootloader menu appears.
3. Select the “Recovery Mode” option using the volume keys and press the power button to select it.
4. Your phone will now boot into recovery mode.
5. Select the “Wipe Data/Factory Reset” option using the volume keys and press the power button to select it.
6. Confirm the action by selecting “Yes – erase all user data” and press the power button to select.
7. Your phone will now reset and reboot.
factory reset moto E22 with buttons
1. Turn off the phone.
2. Press and hold the Volume down and Power buttons simultaneously until the device vibrates and the Motorola logo appears.
3. When the Motorola logo appears, release the Power button and keep pressing the Volume down button.
4. Using the Volume down button, scroll down and select “Recovery Mode”.
5. Press the Power button to select “Recovery Mode”.
6. When the Android logo appears, press and hold the Volume Up button and press and release the Power button.
7. Use the Volume down button to scroll down and select “Wipe data/factory reset”.
8. Press the Power button to confirm the selection.
9. Use the Volume down button to scroll down and select “Yes – delete all user data”.
10. Press the Power button to confirm the selection.
11. When the reset is complete, use the Volume down button to scroll down and select “Reboot system now”.
12. Press the Power button to reboot the device.
what to do if resetting Motorola E22 doesn’t work
If resetting your Motorola E22 does not work, you may need to try a different approach such as clearing the cache or performing a factory reset. If that does not work, you may need to contact Motorola support or take the device to a repair shop.
If the device is still under warranty, you should check to see if the issue is covered by the warranty, as this could be a good option for getting your device fixed. Finally, if all else fails, you may want to consider replacing your device.
Shah Wajahat is a Computer Science grad and a Cisco CCNA certified Professional with 3+ years of experience in the Tech & software industry. Shah loves helping people with tech by explaining to layman audience technical queries in an easier way.
