1. Make sure the phone is powered off.
2. Press and hold the Volume Down and Power keys simultaneously for about 10 seconds.
3. Release the keys when the Motorola logo appears on the screen.
4. Use the Volume keys to scroll to the ‘Recovery Mode’ option and press the Power key to confirm.
5. When the Android logo appears, press and hold the Volume Up key for about 10 seconds.
6. Use the Volume keys to scroll to ‘Wipe Data/Factory Reset’ and press the Power key to confirm.
7. Select ‘Yes-delete all user data’ and press the Power key to confirm.
8. When the reset is complete, select ‘Reboot System Now’ and press the Power key to confirm.
Table of Contents
how to restart your moto G52
1. Go to the Settings menu of your Moto G5.
2. Scroll down and select ‘Backup & reset’.
3. Tap on ‘Factory data reset’.
4. Read the warning message and tap on ‘Reset Phone’.
5. Enter your PIN code if you have set one.
6. Finally, tap ‘Erase Everything’ to restart your Moto G5.
How to do a factory reset moto G52 with menu
1. From the Home screen, tap the Apps icon.
2. Scroll to and tap Settings.
3. Tap System.
4. Tap Reset.
5. Tap Factory data reset.
6. Tap Reset phone.
7. If presented with a confirmation screen, tap Erase everything.
8. Your device will restart and begin the factory data reset process.
hard reset moto G52 with a combination of buttons
To perform a hard reset on the Moto G52, press and hold the Volume Down and Power buttons simultaneously until the bootloader menu appears. Then use the Volume buttons to select “Recovery Mode” and press the Power button to confirm. Once the Android logo appears, press and hold the Power button and then press and release the Volume Up button. This will bring up the recovery menu. Select “Wipe Data/Factory Reset”, then select “Yes” to confirm and perform the reset.
If you are unable to access the recovery menu, you may need to boot the device into fastboot mode (also known as bootloader mode). To do this, press and hold the Volume Down and Power buttons simultaneously until the bootloader menu appears. Then use the Volume buttons to select “Fastboot Mode” and press the Power button to confirm. Once the device is in fastboot mode, connect it to a computer and use the fastboot command to perform a factory reset.
Shah Wajahat is a Computer Science grad and a Cisco CCNA certified Professional with 3+ years of experience in the Tech & software industry. Shah loves helping people with tech by explaining to layman audience technical queries in an easier way.
