To perform a hard reset on the Motorola G31, you will need to power off the device and then press the power button and volume down button simultaneously. Hold the buttons for about 10 seconds until the device vibrates and boots into recovery mode.
From here, use the volume buttons to navigate to the wipe data/factory reset option, and then select it with the power button. The device will then reset to its factory settings.
Note: This process will erase all data and settings stored on the device.
Table of Contents
how to restart your moto G31
1. Press and hold the Power button until the Power menu appears.
2. Tap Restart.
3. Tap Restart again to confirm.
4. Your Moto G31 will now start restarting.
5. Once the restart is complete, your Moto G31 will be ready to use.
how to do a factory reset moto G31 with menu
1. Go to Settings > System > Reset Options.
2. Select Factory Data Reset.
3. Tap Reset phone.
4. Enter your PIN, pattern, or password.
5. Tap Erase Everything. Your phone will restart and begin the factory data reset process. Once it’s finished, your phone will be restored to its factory default settings.
hard reset moto G31 with a combination of buttons
To hard reset your Moto G31, press and hold the Power and Volume Down buttons for about 10 seconds. The device will then reboot and you should see the Android system recovery screen. From this screen, use the Volume buttons to select Wipe Data/Factory Reset and press the Power button to confirm. The device will then start the reset process. If the above steps do not work, try booting the device into Fastboot mode and use the fastboot command to perform the factory reset. To do this, press and hold the Power and Volume Down buttons for about 10 seconds until the Fastboot menu appears.
Then, use the Volume buttons to select Recovery and press the Power button to confirm. The device will then open the Android system recovery screen. From this screen, use the Volume buttons to select Wipe Data/Factory Reset and press the Power button to confirm. The device will then start the reset process.
how to do if resetting Motorola G31 doesn’t work
If resetting your Motorola G31 doesn’t work, you may need to perform a factory reset. A factory reset will restore the phone to its original settings and erase all user data. To perform a factory reset on your Motorola G31, go to Settings > System > Reset > Factory Data Reset. Select the option to erase all data and confirm the reset.
This will restore the phone to its original settings and erase all user data. If the factory reset does not work, you may need to contact Motorola support for assistance.
Shah Wajahat is a Computer Science grad and a Cisco CCNA certified Professional with 3+ years of experience in the Tech & software industry. Shah loves helping people with tech by explaining to layman audience technical queries in an easier way.
