hard reset Motorola Fusion

Spread the love

1. Power off the device.

2. Press and hold the “Volume Up” and “Volume Down” buttons simultaneously.

3. Press and hold the “Power” button while still holding the volume buttons.

4. Release all buttons when the Motorola logo appears on the screen.

5. Select “wipe data/factory reset” using the volume buttons to scroll and the power button to select.

6. Select “Yes — delete all user data” to confirm the reset.

7. Select “reboot system now” to restart the device.

how to restart your Moto ONE FUSION

1. Press and hold the Power button on your Moto ONE Fusion until the Power menu appears.

2. Select the Restart option.

3. Your device will now restart.

how to do a factory reset moto ONE FUSION with menu

Cinemark XD 41 edited

1. Go to the Home screen and choose Apps.

2. Scroll down and select Settings.

3. Tap on System.

4. Select Reset Options.

5. Select Erase All Data (factory reset).

6. Confirm your selection by tapping Reset Phone.

7. Select Erase Everything.

8. The phone will now begin the factory reset process. It may take several minutes to complete.

9. When the process is complete, the phone will restart and you will be presented with the setup screen.

See also  hard reset apple watch series 2 (38mm and 42mm)

hard reset moto ONE FUSION with a combination of buttons

To perform a hard reset on Moto One Fusion, press and hold the Power and Volume Down buttons simultaneously for at least 8 seconds. The device will then reboot and the reset process will be complete. If the phone does not respond, you may need to remove the battery and then reinsert it. Then press and hold the Power and Volume Down buttons together for at least 8 seconds.

The device will then reboot and the reset process will be complete. If this doesn’t work, you can also try performing a factory reset from the Settings menu. On the device, go to Settings > System > Reset Options > Erase all data (factory reset). This will delete all data and settings from the device.

how to do if resetting Motorola ONE FUSION doesn’t work

If resetting your Motorola ONE FUSION does not work, then you should try a more advanced troubleshooting technique. This could involve booting into recovery mode and clearing the cache, performing a factory reset, or flashing the device with new firmware. You may also need to contact Motorola support for assistance with more complex issues.

If none of these steps resolves the problem, then you may need to take your Motorola ONE FUSION to a service centre for further diagnosis and repair.

Was this article helpful?
YesNo