To perform a hard reset on the Motorola Edge 20, press and hold the Power and Volume Down buttons for about 10 seconds until the device vibrates and the Motorola logo appears on the screen.
This will reset the device to its factory settings. If the above steps do not work, you can also try to boot the device into Recovery Mode by pressing and holding the Power and Volume Up buttons for about 10 seconds until the Recovery Mode options appear on the screen
. From here, select the “wipe data/factory reset” option to reset the device to its factory settings.
Table of Contents
how to restart your moto EDGE 20
To restart your Moto EDGE 20, hold the power button for a few seconds until you see the power options menu on the screen.
Select “Restart” from the menu and confirm your choice. Your device will then begin the restart process and should be back to normal after a few minutes. If your device is frozen and unresponsive, you can also perform a forced restart. To do this, press and hold the power button for about 10-15 seconds until the device restarts.
how to do a factory reset the moto EDGE 20 menu
1. Go to the main menu of your Motorola EDGE 20 phone.
2. Scroll down and select the “Settings” option.
3. Select “Backup & Reset” and then select “Factory Data Reset”.
4. You will be prompted to confirm the reset. Select “Reset Phone” and then “Erase Everything”.
5. Your phone will begin resetting. Once the reset is complete, your phone will be restored to its original factory settings.
how to reset moto EDGE 20 with a combination of buttons
Unfortunately, there is no way to reset the Moto EDGE 20 with a combination of buttons. The only way to reset the device is by performing a factory reset through the settings menu. To do this, go to Settings > System > Reset Options > Factory Data Reset and follow the on-screen instructions.
If the device is completely unresponsive and you cannot access the Settings menu, then you may need to use the hardware buttons to initiate a factory reset. To do this, press and hold the Power and Volume Down buttons simultaneously for 10 seconds. When the device powers up, it should automatically start the factory reset process and you can follow the on-screen instructions to complete it.
Shah Wajahat is a Computer Science grad and a Cisco CCNA certified Professional with 3+ years of experience in the Tech & software industry. Shah loves helping people with tech by explaining to layman audience technical queries in an easier way.
