To reset Apple Watch SE, press and hold the side button and the Digital Crown at the same time for at least 10 seconds until you see the Apple logo. Once the Apple logo appears, release both buttons and wait for the reset process to complete.
This process may take several minutes, and you may need to charge your watch if the battery is low. When the reset is complete, you will see the Hello screen. Follow the on-screen instructions to complete the setup process.
Table of Contents
factory reset your apple watch SE using your paired iPhone
1. Open the Apple Watch app on your paired iPhone.
2. Tap the My Watch tab.
3. Tap General > Reset.
4. Tap Erase All Content and Settings.
5. Enter your Apple ID password when prompted.
6. Follow the on-screen instructions to confirm that you want to erase your Apple Watch.
7. Once the reset is complete, you can set up your Apple Watch as new.
8. You can also restore from a backup if you want to keep your existing watch face settings and app data.
the second method is to hard reset your watch without pairing it with the iPhone
To do a hard reset of your watch without pairing it with iPhone, follow these steps:
1. On your watch, press and hold the side button until you see the Power Off slider.
2. Slide the Power Off slider to turn off your watch.
3. Press and hold the side button again until you see the Apple logo.
4. Wait for your watch to restart.
5. Once your watch is restarted, it should no longer be paired with your iPhone.
how to restart your apple watch SE
To restart your Apple Watch SE, press and hold the side button until the power off slider appears. Slide the power-off slider to the right and wait for the watch to turn off. Once it has shut down, press and hold the side button again until the Apple logo appears.
Your watch will then restart. If your watch is unresponsive, press and hold both the side button and the Digital Crown for at least 10 seconds until you see the Apple logo. If your watch is still unresponsive, you may need to force restart it. To do this, press and hold both the side button and the Digital Crown for at least 10 seconds, until the Apple logo appears and the watch restarts.
force restart your apple watch SE
To restart your Apple Watch SE, press and hold both the Digital Crown and the side button together for at least 10 seconds. When the Apple logo appears, release both buttons. Your watch will then restart. If the issue persists after restarting your watch, try force restarting your watch.
To force restart your Apple Watch SE, press and hold both the Digital Crown and the side button together for at least 10 seconds, until the Apple logo appears and the watch shuts down. Keep holding until the watch restarts, and the Apple logo appears again. If the issue still persists, contact Apple Support for further assistance.
what to do if the reset of the apple watch SE not working
If the reset of the Apple Watch SE is not working, try the following steps:
1. Unpair and reset the watch. To do this, open the Watch app on your iPhone, tap the My Watch tab, and then select the watch you want to unpair and reset. Tap the information icon, then choose Unpair Apple Watch.
2. Force restart the watch. To do this, press and hold both the Digital Crown and the side button until the Apple logo appears.
3. Contact Apple Support for additional help.
Shah Wajahat is a Computer Science grad and a Cisco CCNA certified Professional with 3+ years of experience in the Tech & software industry. Shah loves helping people with tech by explaining to layman audience technical queries in an easier way.
